Home> Silane-Modified Installation Adhesive

Silane-Modified Installation Adhesive

The JETGOOD^® 6101(a sub-brand/trademark of Banfert in the field of adhesive products) Floor Adhesive is a single-component moisture-curing silane-modified installation adhesive that boasts excellent sealing and flexibility. It is non-corrosive, non-polluting to the adhered substrate, and environmentally friendly. The product bonds strongly to wooden flooring, tiles, metals, and more.

Silane-Modified Installation Adhesive details

Silane-Modified Installation Adhesive supplier

Four Advantages for More Assured and Hassle-Free Floor Installation

Low-VOC and Eco-Friendly, Ensuring Family Health：

Complies with GB 33372-2020 'Limitations on Volatile Organic Compounds in Adhesives' testing standard, meets RoHS and REACH environmental standards, low VOC and solvent-free.

Powerful Adhesion and Durable Strength：

Ensures floor flatness without warping, deformation, or hollow spots.

Waterproof and Moisture-resistant with Excellent Sealing Properties：

Outstanding waterproof performance, remaining resilient against detachment and cracking over time.

Bonds Tightly to Substrates, Effectively Reducing Noise：

After curing, the elastic adhesive conforms to substrates, significantly reducing noise and vibrations, ensuring a comfortable walking experience.

Silane-Modified Installation Adhesive manufacture

Superior Performance, Dedicated to Flooring Installation

The product meets or exceeds standards in multiple performance tests.When applied to floor bonding, the JETGOOD 6101 Floor Adhesive not only augments the elasticity and comfort underfoot but also effectively functions as a waterproof and moisture barrier, thus helping to prevent floor deformation.

Product Parameters

Project	Performance Metries	Typical Values	Test Basis
Appearance	Appears as a homogeneous paste in white or beige color with a fie texture and no visible impurities.		Visual Inspection
Density(g/cm³)		1.65	GB/T 13477.6
Extrudability(ml/min)	≥80	128	GB/T 13477.4
Shore hardness A	60~80	67	GB/T 531.1
Surface Drying Time(min)	20~60	45	GB/T 13477.5
Mass Loss Rate(%)	≤3	2	GB/T 13477.19
Tensile Strength (Mpa)	≥1.0	1.02	GB/T 528
Elongation at Break(%)	≥100	100	GB/T 528
Elastic Recovery Rat(%)	≥70	90	/
Shear Strength(Mpa)	≥2	2.5	/
Minimum Peeling Force(N)	≥20	28	/
Operating Temperature(℃)	-40~90		/